SetupWizzard by CP Tech GmbH/Accessories products

Extension Cable Toe Maesurement 200mm from 105,91 €

Mon, 09 Mar 2026 10:47:31 +0100

Description:

This extension is used when the standard toe cable is insufficient due to a higher system design and additional cable length is required.

One set consists of 4 extension cables.

Measuring pin constant offset 76,16 €

Fri, 06 Mar 2026 15:02:23 +0100

Function:

The measuring pin is used to extend the measuring tip of your height sensor by a fixed offset value. This enables precise access to measuring points on the chassis that are located above the underbody, for example, and cannot be reached with standard tips.

Key-Facts:

Function: Extension of the measuring tip on the height sensor by a fixed offset value.
Application: Reaches hard-to-reach measuring points on the chassis (e.g. above the underbody).
Efficiency: Quick expansion of the measuring range without recalibration.
Measurement points: Significantly increases the number of measurable points per vehicle.

Measurement with wheels (4x Tire plate) 1.428,00 €

Tue, 13 Jan 2026 14:26:52 +0100

Details:

Measurement of ride height on original wheels
Measurement of total vehicle weight on original wheels
4x tire plates included in delivery
Maximum tire width 400 millimeters

Advantages:

Prevention of chassis tensioning through sliding plates
Simple and robust handling
Height and weight offsets taken into account in WizzardOS

Fast and accurate measurement:

Place the vehicle with its original wheels on the tire plate. This allows both the vehicle weight and the ride height to be reliably determined.

This solution enables quick measurement without having to mount setup wheels—ideal for efficient vehicle tuning.

Charge cable for camber & height sensor 14,28 €

Tue, 20 May 2025 09:24:17 +0200

With this charging cable, both the digital camber sensors and the digital height measurements can be charged separately and independently of the flight case integrated charging station.

All that is required is a standard USB charger (not included).

Camber Measurement upgrade kit from 1.368,50 €

Tue, 13 May 2025 12:20:18 +0200

Upgrade Kit - Camber Measurement -

With this kit, both the BaseLine system variant and all previous versions of the 2.1 series, such as the Pro, Basic, and Easy, can be converted to the new digital camber measurement.

To do this, the included adapter plates are mounted on the existing setup wheels and connected to the freely available WizzardOS software via Bluetooth.

Alternatively, the camber values can also be read on the integrated display.

Two different versions allow you to upgrade to either one sensor or, if necessary, to four camber sensors.

In order to guarantee accuracy of the high-precision camber sensors at any time and, if necessary, to adapt them to changing external influences such as outside temperatures, air pressure and humidity, we recommend the additional calibration tool 624430.

Part Number 555094

4 Camber sensors (digital boxes)
4 adapter plates
Charging cable
Mounting material

Part Number 555095

1 camber sensor (digital box)
4 adapter plates
Charging cable
Mounting material

Flightcase 4.046,00 €

Mon, 14 Apr 2025 13:12:42 +0200

Details:

Large casing for system and accessories
Improved hinge design
Ext. power supply and integrated charging module
Top loader with space for assembled setupwheels
Integrated sorting for clean and save transportation
Front lid with table function
Metal drawer slider
Additional drawer for accessories

Calibration tool camber sensor 95,20 €

Mon, 20 Apr 2026 14:59:57 +0200

Details:

Adjustment tool for camber sensor
Secure positioning on the platform thanks to magnet and guide

Leveling Laser 773,50 €

Mon, 09 Mar 2026 10:29:37 +0100

Leveling laser:

Extended shaft
Better visibility in bright enviroments
Extra thin laser
Fine levelling screw
USB-C charge connector
Rechargeable batteries
Integrated spirit level
Improved stands

Adjustment tool_ levelling platform 70,21 €

Wed, 07 May 2025 08:44:55 +0200

Details:

Simple and and accurate levelling of plattforms
Usable by hand or socket wrench

Caster and king pin angle measurement 2.1 999,60 €

Wed, 09 Apr 2025 09:16:01 +0200

Details:

With the caster and splay measurement as an extension for the PRO system variant, caster and splay can be determined easily and in no time at all - without the need for additional software.

Longer platform feet from 33,32 €

Fri, 11 Jul 2025 16:08:10 +0200

Precise in all positions:

Extend the leveling range of the SetupWizzard measuring platform from 45 mm to 85 mm by simply replacing the standard feet. This means that consistent and precise measurement results are always possible - regardless of the situation.

Levelling sleeves from 30,94 €

Fri, 20 Jun 2025 15:36:32 +0200

Details:

Three notch version
The additional leveling sleeves make it easier to align the wheel load scale.
They help to quickly set up the measuring area and guarantee greater measuring accuracy.
Three sleeves are supplied as standard

868,70 €

Mon, 20 Apr 2026 14:59:57 +0200

Air Jacks Height Blocks from 65,45 €

Tue, 17 Feb 2026 11:21:35 +0100

Details:

With our height blocks you can extend the lift range of your air jacks
Used for cars with very low ground clearance
The product is available in two versions (short/long)
Both Versions available in 23,30,40,50,60mm thickness

Digital camber sensor (Digibox) 821,10 €

Tue, 17 Feb 2026 11:21:33 +0100

Details:

The camber sensor (Digibox) enables digital measurement of the camber
The Sensor is magnetically attached on top of the SetupWheels for higher accuracy
Measured values are wirelessly transferred to WizzardOS software
Due to its versatality, the box can be used for any kind of angular measurements eg. wing angle, steering wheel angle, etc. The respective naming of the measured value will be assigned in the software.

Analog Height Measurement -short- 333,20 €

Wed, 07 May 2025 16:20:58 +0200

Details:

Analog height measurement enables precise results for vehicles with defined measuring points up to 120 mm
Both measuring tips are included in the scope of delivery

Stand - Digital Height Measurement 82,11 €

Wed, 30 Apr 2025 10:21:31 +0200

Digital height measurement from 928,20 €

Tue, 17 Feb 2026 11:21:38 +0100

Go digital:

Digital height measurement offers a modern alternative to conventional analog measurement. The measured values are transmitted directly to the system via Bluetooth for data storage

As well compatible with previous Setupwizzard systems: Easy, Basic & Pro

Standard color: blue

Advantages:

Measured values are transmitted to the software via Bluetooth
Charging option in flight case
Measuring range <140mm extendable. Optional tips available.
Extension of the measuring range by 45mm by unscrewing the measuring tip (offset value can be entered in the software)

Plattform Height Extension from 654,50 €

Wed, 27 Aug 2025 23:01:23 +0200

Increased comfort:

The platform elevations optimize the flexibility and user-friendliness of the wheel load scales by providing a comfortable working height during wheel alignment and extending their adjustment range.

Simple customization:

The adjustment range of the wheel load scales is 45 mm as standard and can be easily and flexibly extended to 130 mm using the extension.

One set includes four platforms (4 pcs.).

Laser scales 214,20 €

Wed, 05 Jun 2024 13:03:21 +0200

Details:

They can be exchanged flexibly and easily, making it easy to read the track measurement values.
Whether angular minutes, classic millimeters or as a split scale. One set includes four scales (4 pcs.).

SetupWizzard by CP Tech GmbH/Accessories products

Extension Cable Toe Maesurement 200mm from 105,91 €

Measuring pin constant offset 76,16 €

Measurement with wheels (4x Tire plate) 1.428,00 €

Charge cable for camber & height sensor 14,28 €

Camber Measurement upgrade kit from 1.368,50 €

Flightcase 4.046,00 €

Calibration tool camber sensor 95,20 €

Leveling Laser 773,50 €

Adjustment tool_ levelling platform 70,21 €

Caster and king pin angle measurement 2.1 999,60 €

Longer platform feet from 33,32 €

Levelling sleeves from 30,94 €

868,70 €

Air Jacks Height Blocks​ from 65,45 €

Digital camber sensor (Digibox) 821,10 €

Analog Height Measurement -short- 333,20 €

Stand - Digital Height Measurement 82,11 €

Digital height measurement from 928,20 €

Plattform Height Extension from 654,50 €

Laser scales 214,20 €

Air Jacks Height Blocks from 65,45 €